Sharp UP-600 Stereo System User Manual


 
97
Programming
This chapter explains how to program various items.
Before you start programming, turn the mode switch to PGM1 or PGM2
depending on the item you are going to program.
Basic Instructions
This section illustrates the basic programming by using an example of programming for departments.
Programming example
The following example shows how to program $2.00 for the unit
price, ABCDE for the description, and the scale entry to be
enabled for department 1.
1.
In the PGM2 window, select 02 SETTING by using the
or key and press the
(ENTER)
key.
The SETTING window will appear.
NOTE
You can also select “02 SETTING” by pressing the
2
and
(ENTER)
keys.
If you return to the previous screen, press the
(CANCEL)
key.
2.
Select 01 ARTICLE.
The ARTICLE window will appear.
NOTE
The arrow mark in the upper-right corner of the window shows
that the window contains more options than are now on the
screen. To scroll the window, press the
PAGE
DOWN
key.
To return to the previous page, press the
PAGE
UP
key.
3.
Select 01 DEPARTMENT.
The DEPARTMENT window will appear, listing
programmable departments.
13
(ENTER)
(CANCEL)
(ENTER)
(CANCEL)
(ENTER)
(CANCEL)
PGM1 MODE
PGM2 MODE