Sharp MD-X60H Stereo System User Manual


 
<P=002>
(Continued)
Recording from a CD or an MD to a cassette tape
(One-Touch Editing)
REVERSE
MODE
REVERSE
MODE
DOLBY
NR
DOLBY
NR
MD
TAPE
TAPE
TAPE
CD TAPE
MD
MD
CD
TAPE
CD
CD
CD
MD
MD
A CD or an MD can be recorded, starting from the first track, with a one-touch
operation.
1 Load a blank cassette into the cassette compartment.
Wind past the tape leader which cannot be recorded on.
2 Press the REVERSE MODE button.
... To record on only one side.
... To record on both sides.
3 Select the Dolby NR mode by pressing the DOLBY NR button.
When recording with the Dolby NR system, turn on the indicator.
When not recording with the Dolby NR system, turn off the indicator.
4 Recording from a CD:
Press the CD TAPE button.
Recording from a MiniDisc:
Press the MD TAPE button.
To stop recording:
Press the CD (MD ) or TAPE button.
Recording from a CD or an MD to a cassette tape
(Synchronised Recording System)
When a CD or an MD is played, recording will start automatically.
1 Load a blank cassette into the cassette compartment.
Wind past the tape leader which cannot be recorded on.
2 Press the REVERSE MODE button.
... To record on only one side.
... To record on both sides.
3 Select the Dolby NR mode by pressing the DOLBY NR button.
When recording with the Dolby NR system, turn on the indicator.
When not recording with the Dolby NR system, turn off the indicator.
4 Press the TAPE button.
The unit will enter the recording stand-by mode.
5 Recording from a CD:
Press the CD button.
Recording from a MiniDisc:
Press the MD button.
To interrupt recording:
Press the CD (MD ) button.
Press the CD (MD ) button again to resume recording.
To stop recording:
1 Press the CD (MD ) button, whilst recording.
The CD or MD will stop, and the unit will enter the stand-by mode.
2 Press the TAPE button.
The tape will stop.
3
2
MD-X60H(SUK) TINSE0227AWZZ
31