Filter
Top Products
YO <P=001>
CASSETTE OPERATION
■ Normal playback
1 Press the TAPE ■ button.
● The power will be turned on automatically, and the unit will enter the TAPE
mode.
2 Open the cassette door by pushing the area marked "PUSH OPEN".
3 Load the cassette into the cassette compartment.
4 Press the REVERSE MODE button.
1
6
4
5
1
5
6
4
3
2
3
1
4
5
6
... To listen to one side of the tape.
... To listen to both sides of the tape.
... For endless repeat play of both sides of the tape.
5 Select the Dolby Noise Reduction (NR) mode by pressing the DOLBY NR but-
ton.
● When a tape recorded with the Dolby NR system is used, turn on the Dolby NR
indicator.
● When a tape not recorded with the Dolby NR system is used, turn off the Dolby
NR indicator.
6 Press the button to listen to side A (1), or the button for side B (2).
● To play both sides of the tape ( ), start from side A (1). When the tape starts
playback from side B (2), side A (1) will not be played after side B (2) finishes.
To stop playback:
Press the TAPE ■ button.
To fast-wind the tape onto the left reel:
Press the button when the tape is stopped.
To fast-wind the tape onto the right reel:
Press the button when the tape is stopped.
Listening to the reverse side during playback:
Press the or button during playback.
Direct play:
● If a tape is already loaded, when you press the or button, the power will
be turned on automatically, and playback of the tape will start.
To restart the track being played from the beginning:
Press the or button during playback.
To listen to the next track:
Press the or button during playback.
Precautions:
● When removing the cassette tape, press the TAPE ■ button, and then open the
cassette compartment.
● Before changing from one tape operation to another, press the TAPE ■ button.
● If a power failure occurs during tape operation, the tape head will remain engaged
with the tape and the cassette door will not open. If this occurs, wait until power
is restored.
Dolby NR indicator
MD-X60H(SUK) TINSE0227AWZZ
20