Filter
Top Products
YO <P=001>
(Continued)
■ Recording a track you want to add at the beginning of a
MiniDisc (Pole Position Editing)
When a track is added to an MD which already has recordings on it, and the POLE
POSITION button is pressed, the track can be recorded at the beginning of the
MD.
DISPLAY
DISPLAY
MD
MD
3
2
To record from a CD onto a MiniDisc:
2
3
2
2
3
3
4
2
2
3
1 Prepare for recording.
One-Touch Editing: (Page 26. Steps 1 to 3)
Track Editing: (Page 27. Steps 1 to 5)
Hypertrack Editing: (Page 27. Steps 1 to 6)
2 Press the POLE POSITION button.
● " " will be displayed.
3 Press the CD MD button.
● Recording will begin.
If recording does not start when the CD MD button is pressed:
If you cannot record all of the tracks you have selected from a CD, the number
of tracks and the amount of time that can be included on the recording, and the
number of tracks and the amount of time that cannot be included will both be
displayed. The unit will then enter the recording stand-by mode.
To record from a cassette tape:
1 Perform steps 1 to 6 on page 29 "One-Touch Editing".
2 Press the POLE POSITION button.
● " " will be displayed.
3 Press the TAPE MD button.
● Recording will begin.
To record from the built-in radio onto a MiniDisc:
1 Perform steps 1 to 5 on page 29 "Recording from the built-in radio onto a
MiniDisc".
2 Press the POLE POSITION button.
● " " will be displayed.
3 Press the MD ●REC button.
● The unit will enter the recording stand-by mode.
4 Press the MD button.
● Recording will begin.
MD-X60H(SUK) TINSE0227AWZZ
30