Filter
Top Products
Caution:
• Turn off all other equipment before making this connection.
Notes:
• Setthe TV atlowvolume beforeturningonthesystem.
• GAINknobisinvalidduring DIGITAL(HDMI)function.
• Makesuretosetthe correctinputselectorontheAmplifiertoa preferred
connectionbeforeusinganyofthesemethods.
ACTIVE CONNECTION INPUT SELECTOR
HDMI Set to DIGITAL
HEADPHONE OUT
Set to ANALOG
RCA
Amplifier
• This unitsupportsHDMI which enablesARC (AudioReturn Channel).
• ToenableARC makesureto useHigh Speed HDMITMcable (with ARC).
• This ARCfeaturerequiresTV thatsupportsARC.RefertheoperationmanualoftheTV todeterminewhichterminalsupportsARC.
• To listento the sound from a non-ARC-compatible TV,connect the audio output from TV to this system's AUDIO IN (TV)terminal. (refer
page 12)
• This unit can be operated (power on/off or volume up/down) via a TV or similar component which supports HDMI CEC (Consumer
ElectronicsControl).Ifthisdoes notwork, itdoesnot meanthis systemis faulty.Referto theoperation manualof the respectivecomponent
on howto activatethe CEC.
Example:Go tothe Menuof the component to search and enablethe CEC. Different brands may havedifferent naming br the CEC. For
SHARP LCDTV,it is named as AQUOSLINK.
• To listen to the sound from this system, you will need to adjust the speaker output settings within the TVmenu.
For details, refer to the operation manual of the TV.
• If you are unable to select external speaker setting from the TVmenu (E.g. For SHARPLCD TV,it is named as AQUOSAUDIO SP),
turn the CEC OFF and ON again.
• Makesure the LCDTV Audiooutputsetting isset to PCM,not other formatssuch as DolbyDigital, DTS,etc.
• To enjoy3D images, this system must beconnectedto a 3D-compatibleTV and components(3D BD player,etc.)via High Speed HDMI
cables. Putonthe 3D glasses,otherwise3Dimages may not beviewedproperly.
Select from the 2 methods below:
1. Method 1
This connection isfor HDMI TV with ARC (Audio Return Channel).
TV To TV HDMI in3ut terminal
DVD, BD player
Amplifier _ or similar
f
ToTV HDMI (ARC) _=_
terminal
To HDMI (TV ARC) output terminal
Notes:
• Refer to the operation manual of the equipment to be connected.
• Fully insert the plugs to avoid fuzzy pictures or noises.
2. Method 2
This connection isfor HDMI TV without ARC (Audio Return Channel).
DVD, BD player
or similar
HDMI OUTPUT
To HDMI
input
terminal
Amplifier
To HDMI terminal
TV
Notes for ANALOG connection:
• To enjoy sound from TV via this unit, set the input selector switch on the Amplifier to ANALOG.
• If the sound is too low, use the GAIN knob to adjust it to your desired level.
• Connecting via this method may disable TV internal speakers.