Filter
Top Products
Installation image: Notes:
l As the sound from the system is omni-directional, you
can place the speaker anywhere you like. However, it is
TV recommended to place itas close to the TV as possible.
• The front panel of the speaker is not removable.
• If the Amplifier is wall mounted behind the TV, make
sure the distance between the TV and Amplifier are not
less than 8" (20cm) to avoid wireless interruption.
BD Player DVD player
Place the system as shown.
Remove the protective film covering the Amplifier, Sound
Bar and Subwoofer before using the system.
Caution:
Do not change the installation direction when the unit is
turned on.
Place the stand as shown.
Subwoofer
Amplifier
Make to the AC cord before connections. ]
1
sure
unplug power making any
Subwoofer
Right Left
Red White
Sound Bar
AC outlet
AC 120V ~ 60 Hz
I
Amplifier
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Connect the wire without insulation tube to the minus (-)
terminal, and the wire with red and white insulation tube to
the plus (+) terminal.
Caution:
• Use speaker with an impedance of 3 ohms or more, as •
lower impedance speaker can damage the unit. •
• Do not make a mistake when
connecting the right and left ""- -'"
f, r_
speakers. The right speaker is the f-_''
one on the right side when you face
the unit.
Do not let the bare speaker wires
touch each other.
Do not allow any objects to fall into or
to be placed in the bass reflex duct. INCORRECT
• Do not stand or sit on this system. You may be injured.