Filter
Top Products
04/10/21 XL-MP10H(A)E1.fm
6
TINSEA036SJZZ
XL-MP10H
Preparation for Use
System connections
" Aerial connection
Connect the FM/AM loop aerial to the ANTENNA socket.
Position the FM aerial wire and rotate the AM loop aerial for opti-
mum reception. Place the AM loop aerial on a shelf, or attach it to a
stand or a wall.
Notes:
!
Placing the aerial on the unit or near the AC power lead may
cause noise pickup. Place the aerial away from the unit for better
reception.
!
Do not connect the attached FM aerial to an external aerial as
this may cause trouble.
Installing the AM loop aerial:
" Speaker connection
Connect the wire with the white line to the minus (-) terminal and the
plain wire to the plus (+) terminal.
Caution:
Placing the speaker system:
There is no distinction between the right and the left speakers.
Right speaker Left speaker
Wall socket
(AC 230 - 240 V, 50 Hz)
AM loop aerial
FM aerial
Make sure to unplug the AC power lead
before making any connections.
Plain
White line
< Assembling > < Attaching to the wall >
Wall Screws (not supplied)
!
Do not let the bare speaker wires touch each
other.
!
Use speakers with an impedance of 4 ohms or
more, as lower impedance speakers can damage
the unit.
!
Do not mistake the right and the left channels.
The right speaker is the one on the right side
when you face the unit.
Incorrect