Filter
Top Products
04/10/21 XL-MP10H(A)E2.fm
14
TINSEA036SJZZ
XL-MP10H
Disc Playback
Advanced disc playback (continued)
! Direct search of the track
By using the direct search buttons, the desired tracks can be
played.
To stop playback:
Press the button.
Notes:
"
The selected track can be started simply by pressing the direct
search buttons during playback. [It is not necessary to press the
( ) button.]
"
A track number higher than the number of tracks on the disc can-
not be selected.
"
During random play, direct search is not possible.
"
For CD-R/RW discs recorded in the MP3 or WMA format, you
can select the track number but cannot select the folder by press-
ing the direct search buttons.
! Repeat play
All tracks or a programmed sequence can be continuously
repeated.
To cancel repeat play:
Press the REPEAT button again. " " will go out.
Caution:
After performing repeat play, be sure to press the button. Other-
wise, the disc will play continuously.
! Random play
The tracks can be played in random order automatically.
To cancel random play:
Whilst in the stop mode, press the RANDOM button again.
Notes:
"
When you press the RANDOM button during playback, the main
unit switches to random play.
"
Random play will stop automatically when all tracks are played
once. (The same track will not be played back twice.)
"
In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
"
If you press the button during random play, you can move to
the next track by the random operation. On the other hand, the
button does not allow you to move to the previous track. The
beginning of the track being played will be located.
1
Whilst in the stop mode, use
the direct search buttons on
the remote control to select the
desired track.
Selected track number
"
The direct search buttons allow you to select up to number 9.
"
When selecting number 10 or higher, use the "+10" button.
A. For example, to choose 13
1 Press the "+10" button once.
2 Press the "3" button.
B. For example, to choose 30
1 Press the "+10" button three times.
2 Press the "0" button.
2
Press the ( ) button to start playback.
Playback of the selected track is started. When the last track on
the disc has finished playing, the unit will stop automatically.
To repeat all tracks:
1 Press the REPEAT button.
2 Press the ( ) button.
To repeat a desired track:
1 Perform steps 1 - 3 in the "Programmed play" section on page 15
and then press the REPEAT button.
2 Press the ( ) button.
To repeat random play:
Press the REPEAT button during random play.
Whilst in the stop mode, press the
RANDOM button and the ( ) but-
ton sequentially to begin random
play.