Filter
Top Products
04/10/21 XL-MP10H(A)E2.fm
25
TINSEA036SJZZ
XL-MP10H
References
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
! General
! Amplifier
! Tuner
! CD player
! Cassette deck
! Speaker
Power source AC 230 - 240 V, 50 Hz
Power
consumption
Power on: 25 W
Power stand-by: 0.9 W
Dimensions Width: 160 mm
Height: 242 mm
Depth: 250 mm
Weight 2.3 kg
Output power RMS: 10 W (5 W + 5 W) (10 % T.H.D.)
Output terminals Speakers: 4 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Frequency range FM: 87.5 - 108.0 MHz
AM: 522 - 1,620 kHz
Type Compact disc player
Signal readout Non-contact, 3-beam semiconductor laser
pickup
D/A converter 1-bit D/A converter
Frequency
response
20 - 20,000 Hz
Dynamic range 90 dB (1 kHz)
Frequency
response
125 - 8,000 Hz (normal tape)
Signal/noise ratio 50 dB (recording/playback)
Wow and flutter 0.3 % (WRMS)
Type 10 cm full-range speaker
Maximum input
power
10 W
Rated input power 5 W
Impedance 4 ohms
Dimensions Width: 130 mm
Height: 240 mm
Depth: 161 mm
Weight 1.4 kg/each
8