04/10/21 XL-MP10H(A)E1.fm
3
TINSEA036SJZZ
XL-MP10H
General Information
Precautions
" General
!
Please ensure that the equipment is positioned in a well venti-
lated area and that there is at least 10 cm of free space along the
sides and back. There must also be a minimum of 20 cm of free
space on the top of the unit.
!
Do not place anything on top of the unit.
!
Do not expose the unit to moisture, to temperatures higher than
60°C or to extremely low temperatures.
!
If your system does not work properly, disconnect the AC power
lead from the wall socket. Plug the AC power lead back in, and
then turn on your system.
!
No naked flame sources, such as lighted candles, should be
placed on the apparatus.
!
Attention should be drawn to the environmental aspects of bat-
tery disposal.
!
This unit should only be used within the range of 5°C - 35°C.
Warnings:
!
The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of
accident causing damage. SHARP will not be held responsible
for any damage resulting from use of this unit with a voltage other
than that which is specified.
!
CD players use a laser pickup which can damage the eyes if
viewed directly. Do not look at the pickup, and do not touch
the pickup directly.
" Volume control
The sound level at a given volume setting depends on speaker effi-
ciency, location, and various other factors. It is advisable to avoid
exposure to high volume levels. Do not turn the volume on to full at
switch on and listen to music at moderate levels.
!
Use the unit on a firm, level surface free from
vibration.
!
Keep the unit away from direct sunlight,
strong magnetic fields, excessive dust, hu-
midity and electronic/electrical equipment
(home computers, facsimiles, etc.) which
generate electrical noise.
!
In case of an electrical storm, unplug the
unit for safety.
10 cm
10 cm 10 cm
20 cm
!
Hold the AC power plug by the head when
removing it from the wall socket, as pulling
the lead can damage internal wires.
!
Do not remove the outer cover, as this
may result in electric shock. Refer inter-
nal service to your local SHARP service
facility.
!
The ventilation should not be impeded by
covering the ventilation openings with
items, such as newspapers, tablecloths,
curtains, etc.
1