Sharp CD-DH790NH Stereo System User Manual


 
04/1/28 CD-DH790NH EN
14
Listening to USB mass storage device/MP3 player
Note:
This USB mass storage device or MP3 player is not
compatible with MTP and AAC file systems.
Note:
To pause playback:
Press the / (USB / ) button.
Auto power off function:
In the stop mode of USB operation, the main unit enters
the stand-by mode after 15 minutes of inactivity.
Notes:
SHARP will not be held liable for the loss of data whilst
the USB memory device is connected to the audio
system.
Files compressed in MP3 and/or WMA format can be
played back when connected to the USB terminal.
This USB memory’s format supports FAT 16 or FAT 32.
SHARP cannot guarantee that all USB memory
devices will work on this audio system.
USB cable is not recommended for use in this audio
system to connect to USB memory device. Use of the
USB cable will affect the performance of this audio
system.
This USB memory cannot be operated via USB hub.
The USB terminal in this unit is not intended for a PC
connection but is used for music streaming with a USB
memory device.
External HDD-storage cannot be played back via USB
terminal.
If the data inside the USB memory is large, it may take
longer time for the data to be read.
To play back USB/MP3 player with folder
mode off
1
Press the USB button on the remote control or
FUNCTION button repeatedly on main unit to select
USB function. Connect the USB memory device that
has MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
2 Select desired file to be played back by pressing the
or button.
3 Press the / (USB / ) button. Playback will start
and the file name will be displayed.
Title, Artist and Album name are displayed if they
are recorded in the USB memory device.
Display content can be changed by pressing the
DISPLAY button.
FUNCTION
FUNCTION
AUDIO IN
AUDIO IN
PHONES
PHONES
VOL
VOL
ON/STAND-BY
ON/STAND-BY
PUSH
PUSH
OPEN
OPEN
CD
USB
To play back USB/MP3 player with folder
mode on
1
Press the USB button on the remote control or
FUNCTION button repeatedly on main unit to select
USB function. Connect the USB memory device that
has MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
2 Press the FOLDER button, and press the TUNING (
or ) button on the remote control to select desired
playback folder. To start playback with folder mode on,
go to step 4. To change the playback folder, press the
TUNING ( or ) button on the remote control to
select another folder.
3 Select desired file to be played back by pressing the
or button.
4 Press the / (USB / ) button. Playback will start
and the file name will be displayed.
Title, Artist and Album name are displayed if they
are recorded in the USB memory device.
Display content can be changed by pressing the
DISPLAY button.
To remove USB memory device
1
Press the (USB ) button to stop playback.
2 Disconnect USB memory device from the USB
terminal.