Filter
Top Products
Adjusting settings via the operating menu
26
Via the “Tune” menu item, you can:
1. set a transmission frequency to be stored in the current channel of the frequency bank
(“U1” to “U6”)
2. or select a frequency bank (“U1” to “U6”) and a channel and assign this channel a
transmission frequency.
Setting a transmission frequency for the current channel
̈
Set the desired frequency.
Selecting a frequency bank and a channel and assigning this channel a
transmission frequency
̈ Set the desired frequency bank.
̈ Set the desired channel.
Advanced Menu
Tune
Sync Settings
RF Power
Warnings
LCD Contrast
Reset
IP-Address
Software Revision
Exit
̈ Turn the jog dial until the “Tune” menu item appears.
̈ Press the jog dial.
The frequency selection appears.
It is vital to observe the notes on frequency selection on page 30.
̈ Press the jog dial.
Your settings are stored. The “Tune” menu item appears.
Select the MHz value
and confirm
Tune
B.Ch: U1. 1
Select the kHz value;
store the setting
Tune
B.Ch: U1. 1
Call up “Tune”
(special function)
Advanced Menu
532.300 MHz
552.300 MHz
Exit
Tune
Sync Settings
“Stored”
PEAKPEAK
-10
0
-20
-30
-40
-10
0
-20
-30
-40
AF
AF
PEAKPEAK
-10
0
-20
-30
-40
-10
0
-20
-30
-40
AF
AF
PEAKPEAK
-10
0
-20
-30
-40
-10
0
-20
-30
-40
AF
AF
553.300 MHz
Advanced Menu
Tune
Sync Settings
RF Power
Warnings
LCD Contrast
Reset
IP-Address
Software Revision
Exit
̈ Turn the jog dial until the “Tune” menu item appears.
̈ Keep the jog dial pressed until the frequency bank selection appears.
̈ Press the jog dial.
The channel selection appears.
Select the frequency
bank and confirm
Tune
B.Ch: U1. 1
Select the channel;
store the setting
Tune
Call up “Tune”
(special function)
Advanced Menu
552.300 MHz
552.300 MHz
Exit
Tune
Sync Settings
“Stored”
PEAKPEAK
-10
0
-20
-30
-40
-10
0
-20
-30
-40
AF
AF
PEAKPEAK
-10
0
-20
-30
-40
-10
0
-20
-30
-40
AF
AF
PEAKPEAK
-10
0
-20
-30
-40
-10
0
-20
-30
-40
AF
AF
552.300 MHz
B.Ch: U2. 6