Filter
Top Products
Putting the transmitter into operation
11
̈ Connect the rod antennas ƾ to the two BNC sockets ƿ.
Connecting an audio source to the input sockets
̈ Use a suitable cable to connect the output of the audio source (e.g. mixing console) to the
¼” (6.3 mm) jack/XLR-3 combo socket BAL AF IN L (I) ƺ and/or BAL AF IN R (II) ƻ.
̈ Adjust the output level of your audio source.
̈ Via the operating menu, adjust the transmitter’s input sensitivity. The input sensitivity is
adjusted via the “Sensitivity” menu item and is common for both inputs (see page 22).
Daisy chaining audio signals
You can transmit the same audio signal (e.g. the sum of all audio channels of a mixing
console) to several receivers of a multi-channel system. To do so, you have to daisy chain this
audio signal from one transmitter to the next via the output sockets LOOP OUT BAL L (I) Ƹ
or LOOP OUT BAL R (II) ƹ. The audio signal is then transmitted by all transmitters on one of
the two channels L (I) or R (II). The second channel allows you to transmit an individual audio
signal (e.g. the instrument of a musician). Using the balance setting on the receiver, you can
then adjust the relative levels of the sum of all audio channels and the individual audio signal.
For this, the transmitter has to be set to stereo mode and the receiver to Focus mode.
To daisy chain an audio signal from one transmitter to the next:
̈ Route a signal from the audio source to the input socket (in this example:
BAL AF IN R(II) ƻ) of transmitter A.
ƾ
ƿ
PUSH
PUSH
Stereo Tran
s
L(I)
R(II)
BAL
AF IN
+ 22dBu MAX
RF OUT
ANT
DESIGNED AND MADE IN GERM
FREQ RANGE-Dw
790-865 mHz
ART NO 503841
SER NO 2518100095
IC 2099A-SR20x0
ƺƻ
You can connect several transmitters to the same audio source (see next chapter).
50/60Hz 0.2A ETHERNET RJ-45
B
100 - 240V
RF OUT
PUSH
L(I)
R(II)
BAL
AF IN B
+ 22dBu MAX
PUSH
L(I)
R(II)
BAL
AF IN A
+ 22dBu MAX
ANT A
ETHERNET RJ-45
B
RF OUT
ANT B
DESIGNED AND MADE IN GERMANY
FREQ RANGE-Dw
790-865 mHz
ART NO 627945
SER NO 251810043
FMO
IC 2099A-SR20x0
L(I)
R(II)
+22dBu
MAX
Loop Out B
BAL
PUSH
Stereo Transmitter SR 2000 IEM
L(I)
DESIGNED AND MADE IN GERMANY
FREQ RANGE-Dw
790-865 mHz
ART NO 503841
SER NO 2518100095
IC 2099A-SR20x0
L(I)
R(II)
+22dBu
MAX
Loop Out A
BAL
50/60Hz 0.2A ETHERNET RJ-45
B
100 - 240V
RF OUT
PUSH
L(I)
R(II)
BAL
AF IN B
+ 22dBu MAX
PUSH
L(I)
R(II)
BAL
AF IN A
+ 22dBu MAX
ANT A
ETHERNET RJ-45
B
RF OUT
ANT B
DESIGNED AND MADE IN GERMANY
FREQ RANGE-Dw
790-865 mHz
ART NO 627945
SER NO 251810043
FMO
IC 2099A-SR20x0
L(I)
R(II)
+22dBu
MAX
Loop Out B
BAL
PUSH
Stereo Transmitter SR 2000 IEM
L(I)
DESIGNED AND MADE IN GERMANY
FREQ RANGE-Dw
790-865 mHz
ART NO 503841
SER NO 2518100095
FMO
IC 2099A-SR20x0
L(I)
R(II)
+22dBu
MAX
Loop Out A
BAL
50/60Hz 0.2A ETHERNET RJ-45
B
100 - 240V
RF OUT
PUSH
L(I)
R(II)
BAL
AF IN B
+ 22dBu MAX
PUSH
L(I)
R(II)
BAL
AF IN A
+ 22dBu MAX
ANT A
ETHERNET RJ-45
B
RF OUT
ANT B
DESIGNED AND MADE IN GERMANY
FREQ RANGE-Dw
790-865 mHz
ART NO 627945
SER NO 251810043
FMO
IC 2099A-SR20x0
L(I)
R(II)
+22dBu
MAX
Loop Out B
BAL
PUSH
Stereo Transmitter SR 2000 IEM
L(I)
DESIGNED AND MADE IN GERMANY
FREQ RANGE-Dw
790-865 mHz
ART NO 503841
SER NO 2518100095
IC 2099A-SR20x0
L(I)
R(II)
+22dBu
MAX
Loop Out A
BAL
A
B
C
50/60Hz 0.2A ETHERNET RJ-45
B
100 - 240V
L(I)
R(II)
+22dBu
MAX
Loop Out
BAL
PUSH
PUSH
Stereo Transmitter SR 2000 IEM
L(I)
R(II)
BAL
AF IN
+ 22dBu MAX
RF OUT
ANT
DESIGNED AND MADE IN GERMANY
FREQ RANGE-Dw
790-865 mHz
ART NO 503841
SER NO 2518100095
IC 2099A-SR20x0
50/60Hz 0.2A ETHERNET RJ-45
B
100 - 240V
L(I)
R(II)
+22dBu
MAX
Loop Out
BAL
PUSH
PUSH
Stereo Transmitter SR 2000 IEM
L(I)
R(II)
BAL
AF IN
+ 22dBu MAX
RF OUT
ANT
DESIGNED AND MADE IN GERMANY
FREQ RANGE-Dw
790-865 mHz
ART NO 503841
SER NO 2518100095
IC 2099A-SR20x0
50/60Hz 0.2A ETHERNET RJ-45
B
100 - 240V
L(I)
R(II)
+22dBu
MAX
Loop Out
BAL
PUSH
PUSH
Stereo Transmitter SR 2000 IEM
L(I)
R(II)
BAL
AF IN
+ 22dBu MAX
RF OUT
ANT
DESIGNED AND MADE IN GERMANY
FREQ RANGE-Dw
790-865 mHz
ART NO 503841
SER NO 2518100095
IC 2099A-SR20x0
A
B
C