Filter
Top Products
Using the transmitter
14
To switch the transmitter to standby mode:
̈ If necessary, deactivate the lock mode (see page 14)
To completely switch the transmitter off:
̈ Disconnect the transmitter from the mains by unplugging the mains plug from the wall
socket.
The backlighting of the STANDBY button º goes off.
Deactivating the lock mode temporarily
You can activate or deactivate the automatic lock mode via the “Auto Lock” menu item (see
page 25). If the lock mode is activated, you have to temporarily deactivate it In order to be
able to operate the transmitter:
The lock mode icon ቪ flashes prior to the lock mode being activated again.
Activating/deactivating the RF signal
To deactivate the RF signal:
̈ Press the jog dial.
The transmission icon
ቦ
is displayed again.
̈ Keep the STANDBY button º pressed until “OFF” appears on the display panel.
The transmitter switches to standby mode.
When in the operating menu, pressing the STANDBY button º will cancel your entry
(ESC function) and return you to the standard display.
The STANDBY button º is backlit in red both during operation and in standby mode.
̈ Press the jog dial.
“Locked” appears on the display panel.
̈ Turn the jog dial.
“Unlock?” appears on the display panel.
̈ Press the jog dial.
The lock mode is temporarily deactivated.
– When you are in the operating menu, the lock mode remains deactivated until
you exit the operating menu.
– When the standard display is shown, the lock mode is automatically activated
after 10 seconds.
̈ When the standard display is shown on the display panel, press the STANDBY
button.
“RF Mute On?” appears on the display panel.
Standard -18dB
MHz
PEAK
-10
0
-20
-30
-40
PEAK
-10
0
-20
-30
-40
AF II
AF I
**2000**
552.300
B.Ch: 5.14
EQ
ቪ