Filter
Top Products
8
Putting the plug-on transmitter into operation
Putting the plug-on transmitter into
operation
Inserting the batteries/accupack
For powering the plug-on transmitter, you can either use two 1.5 V AA size
batteries or the rechargeable Sennheiser BA 2015 accupack (see
“Accessories” on page 30).
̈ Slide the battery compartment cover ¸ in the direction of the
embossed arrow and open the cover ¸.
̈ Insert the two batteries or the accupack as shown below. Please
observe correct polarity when inserting the batteries/accupack.
̈ Close the battery compartment.
The battery compartment cover ¸ locks into place with an audible
click.
¸
¸