Filter
Top Products
12
Using the plug-on transmitter
The lock mode icon ቦ flashes prior to the lock mode being activated again.
Muting the audio signal or deactivating the RF signal
The MUTE switch ¾ allows you to mute the audio signal or to deactivate
the RF signal. Via the “Mute Mode” menu item, you can set the desired
function of the MUTE switch ¾ (see page 23).
̈ From the “Mute Mode” menu item, select the desired setting (see
page 23).
̈ Press the SET button.
The lock mode is temporarily deactivated.
– When you are in the operating menu, the lock mode
remains deactivated until you exit the operating menu.
– When one of the standard displays is shown, the lock mode
is automatically activated after 10 seconds.
Setting Slide the MUTE switch ¾... Function
“AF On/Off” ... to the left (position MUTE) Mutes the audio signal
... to the right Unmutes the audio signal
“RF On/Off” ... to the left (position MUTE) Deactivates the RF signal
(offline operation)
... to the right Activates the RF signal
(online operation)
“Disabled” No function
SET
ቦ
MHz
543.850
**2000**
MUTE
AF
P
¾