Filter
Top Products
9
Putting the plug-on transmitter into operation
Charging the accupack
̈ Remove the BA 2015 accupack.
̈ Insert the BA 2015 accupack into the L 2015 charger (see
“Accessories” on page 30).
Plugging the plug-on transmitter onto a microphone
̈ Plug the microphone’s XLR-3M socket onto the transmitter’s XLR-3F
socket ³. Make sure that the latch ¹ locks into place.
̈ Tighten the locking ring · in the direction of the arrow.
The L 2015 charger can only charge the BA 2015 accupack.
Standard batteries (primary cells) or individual rechargeable
battery cells cannot be charged.
The transmitter uses the microphone body as an antenna –
therefore microphones with a metal casing should be used for
best signal transmission.
³
·
¹