Sennheiser SK 5212 Satellite Radio User Manual


 
22
The frequencies are tunable in 5-kHz steps within a switching bandwidth of
36 MHz max.
No t e:
When operating a multi-channel system, make sure to only use inter-
modulation-free frequencies.
There are two options for setting the frequencies:
! You can set a new frequency for the selected channel:
! You can change to a different channel and set a new frequency for the
new channel:
̈ In the selection mode of the “TUNE” menu,
press the multi-function switch
¾ (switch
position
țSET). The current channel number
appears on the display and then the currently
assigned frequency is displayed.
̈ Change the frequency by sli ding the multi-
function switch
¾ to the position ̆ (UP) or
̄ (DOWN).
̈ Store your setting.
̈ Press the multi-function switch ¾ (switch
position
țSET) for a longer time. The current
channel flashes on the display.
̈ Select a new channel by sliding the multi-
function switch to the positi on ̆ (UP) or
̄ (DOWN).
̈ Confirm your selection by pressing the multi-
function switch (switch position
țSET).
SET
DOWN
UP
¾
CH
CH
MHz
MHz
CH
CH
SET
DOWN
UP
¾
CH
RF
CH