Filter
Top Products
23
Entering a name – NAME
Via the “NAME” menu, you can enter a freely selectable name for the
transmitter. This name can be displayed on the standard display and can
consist of up to six char acters such as:
! letters (without pronounciation marks),
! numbers from 0 to 9,
! special char acters and spaces.
After you have changed to the setting mode of the “NAME” menu, the first
segment starts flashing on the LC display panel
¿.
̈ The current frequency of the selected channel
is displayed.
Change the frequency by sliding the multi-
function switch
¾ to the position ̆ (UP) or
̄ (DOWN).
̈ Store your setting.
̈ Slide the multi-function switch ¾ to the posi-
tion ̆ (UP) or ̄ (DOWN) to select a character.
(By sliding the switch only once, the display
jumps either forwards or backwards to the next
character. If you keep the switch slid, the dis
-
play starts cycling continuously.)
̈ Press the multi-function switch ¾ (switch
position țSET) to change to the next segment.
̈ Have you entered the name completely? Press
the multi-function switch
¾ (switch position
țSET) to store your sett ing. “S TO RED ” appears
on the LC display panel
¿
.
RF
MHz
MHz
SET
DOWN
UP
¾