Filter
Top Products
21
Adjustment tips for the operating menu
Selecting a channel – CHAN
Via the “CHAN” menu, you can switch between the channels in the channel
banks “FIX“ and “VAR“. The transmitter is not transmitting while this
adjustment is being made.
When changing to the setting mode of the “CHAN” menu, the current
channel number appears on the diplay. After approx. 1 second, the
currently assigned transmission frequency is displayed.
̈ To select a different channel, slide the multi-function switch ¾ to the
position
̆ (UP) or ̄ (DOWN). The new channel number appears on the
display panel for approx. 1 second and then the currently assigned
transmission frequency is displayed.
Only after the new setting has been stored (“STORED” has appeared on
the LC display panel ) does the transmi tter operate on the transmission
frequency of the new channel.
Note:
The frequencies in the channel bank “FIX” can only be changed by a
Sennheiser Service Partner. If you require a special frequency set in this
bank, please contact your local Sennheiser Service Partner.
Selecting the frequencies to be stored in the channel
bank “VAR” –
TUNE
Via the “TUNE” menu, you can freely select the frequencies to be stored in
the channel bank “VAR” (variable bank). The transmitter is not transmit
-
ting while this adjustment is being made.
Note:
When you have selected the channel bank “FIX” and then select the
“TUNE” menu, the transmitter automatically switches to channel 01 of
the channel bank “VAR” and “VAR” briefly appears on the LC display
panel
¿.
1 sec.
CH
CH
CH
MHz