Sennheiser SK 5212 Satellite Radio User Manual


 
11
! The transmitter can only be switched off when the lock mode is
deacti vated (
see “The automatic lock mode (autolock function)” on
page 13).
Note:
! When in the setting mode of the operating menu, the ON/OFF button
µ will cancel your entry (ESC function).
Doing a frequency check
The transmitter has a frequency check mode that prevents the transmitter
transmitting on an unwanted frequency after switch-on.
To change t he tr ansmi ssion fr equency, pr oce ed as fol lows:
̈ Release the ON/OF F button µ.
̈ Immediately (i.e. within five seconds) press the multi-function
switch
¾ (switch position țSET) twice.
̈ You are now in the setting mode of the “CHAN” or “TUNE” menu where
you can change the transmission frequency (
see “Adjustment tips for
the operating menu” on page 21).
̈ To switch the transmitter off, press the
ON/OFF
button µ
until “OFF” appears on
the LC display panel
¿
.
The red LED
·
and the LC display panel go
off.
̈ When switching on the transmitter, keep
the ON/OFF
button µ pressed.
The current frequency is displayed on the
LC display panel
¿ without the transmit-
ter actually transmitting.
̈ If the displayed frequency is the correct
one, release the ON/OFF
button µ.
After five seconds, “RF” appears on
the LC display panel and the transmitter
is transmitting.
MHz
RF