Filter
Top Products
48
Working with the operating menu
By way of example of the “TUNE” menu, this section
describes how to use the operating menu.
After switching the transmitter on, the standard display is
shown on the display panel.
Getting into the operating menu
̈ Press the SET button to get from the standard display
into the operating menu. The last selected menu flashes
on the display.
Selecting a menu
̈ Press the ̆/̄ rocker button to select a menu.
̈ Press the SET button to get into the setting mode of the
selected menu. The current setting that can be adjusted
flashes on the display.
Adjusting a setting
̈ Press the ̆/̄ rocker button to adjust the setting.
By briefly pressing the ̆/̄ rocker button, the display
jumps either forwards or backwards to the next setting.
In the “CHAN”, “TUNE” and “NAME” menu, the ̆/̄
rocker
button features a “fast search” function. If you
hold down a button, the display cycles continuously,
allowing you to get fast and easily to your desired
setting.
ew500_SK.book Seite 48 Dienstag, 4. November 2003 4:02 16