Filter
Top Products
46
Muting the transmitter
The transmitter has a MUTE switch that noiselessly mutes
the transmitter’s audio signal without switching the
transmitter off.
̈ Set the MUTE switch ¹ to the position ’MUTE’. The
“MUTE” display appears on the display panel. Provided
that the pilot tone function is activated on both the
transmitter and the receiver, the “MUTE” display also
appears on the receiver display panel.
̈ Set the MUTE switch Ƹ back to the original position to
retransmit the audio signal.
Activating/deactivating the lock mode
The transmitter has a lock mode that can be activated or
deactivated via the operating menu (see “Activating/
deactivating the lock mode” on page 55). The lock mode
prevents that the transmitter is accidentally programmed
or switched off during operation.
Ƹ
ew500_SK.book Seite 46 Dienstag, 4. November 2003 4:02 16