Filter
Top Products
43
displays, the transmission of transmitter battery
status information to the rack-mount receivers and
the switch-off thresholds at the end of the operating
time are corrected correspondingly. Due to the
missing sensor, individual rechargeable battery cells
will not be identified as accupacks.
y The monitoring of the accupack temperature during
charging in the L 2015 charger.
y The prevention of improper charging of inserted
primary cells (batteries). Due to the missing sensor,
individual rechargeable battery cells will also not be
charged in the L 2015 charger.
Connecting the microphone/line cable
The microphone/line input is designed for the connection of
both condenser microphones and instruments (e.g.
guitars). DC powering of the condenser microphones is via
the microphone/line input.
̈ Connect the 3.5 mm jack plug ƹ from the microphone/
line cable to the 3.5 mm jack socket (MIC/LINE) ᕡ.
̈ Lock the 3.5 mm jack plug by screwing down the
coupling ring ƺ.
̈ Via the operating menu, adjust the sensitivity of the
microphone/line input (MIC/LINE) (see “Adjusting the
sensitivity” on page 53).
Attaching the microphones
Use the microphone clips ƻ to attach the ME 2 or ME 4 clip-
on microphones to clothing (e.g. tie, lapel).
̈ Adjust the ME 3 headmic so that a comfortable and
secure fit is ensured.
³
ƺƹ
ƻ
ew500_SK.book Seite 43 Dienstag, 4. November 2003 4:02 16