Filter
Top Products
45
Using the bodypack transmitter
Switching the transmitter on/off
The transmitter can only be switched off when the standard
display is shown on the display panel. When in the
operating menu, briefly pressing the ON/OFF button will
cancel your entry (ESC function) and return you to the
standard display with the last stored settings.
Note:
Remove the batteries or the accupack when the
transmitter will not be used for extended periods of
time.
̈ Press the two unlocking buttons µ and open the
battery compartment cover ¾.
̈ Press the ON/OFF button ¸ to switch the transmitter
on. The red LED » lights up.
̈ To switch the transmitter off, press the ON/OFF
button ¸ until “OFF” appears on the display. The red
LED » goes off.
̈ Close the battery compartment. The battery
compartment cover ¾ locks into place with an audible
click.
µ
¾
¸
»
ew500_SK.book Seite 45 Dienstag, 4. November 2003 4:02 16