Filter
Top Products
55
remains unchanged. After the reset, the transmitter is
restarted and the standard display is shown on the display
panel.
Activating/deactivating the pilot tone
transmission –
PILOT
Via the “PILOT” menu, you can activate or deactivate the
pilot tone transmisssion.
The pilot tone supports the receiver’s squelch function
(Squelch) and protects against interference due to RF
signals from other units. The transmitter adds an inaudible
signal, known as the pilot tone, to the transmitted signal.
The receiver detects and evaluates the pilot tone.
Transmitters of the ew 500 series (first generation) do not
transmit a pilot tone and the receivers of the ew 500 series
(first generation) cannot evaluate the pilot tone.
Nevertheless, you can combine the transmitter with a
receiver of the first generation by observing the following:
y With the ew 500 G2 transmitter and an ew 500 G2
receiver:
Activate the pilot tone function with both transmitter
and receiver.
y With the ew 500 G2 transmitter and an ew 500 receiver
or vice versa:
Deactivate the pilot tone function with the ew 500 G2
transmitter or receiver.
Activating/deactivating the lock mode – LOCK
Via the “LOCK” menu, you can activate or deactivate the
lock mode.
The lock mode prevents that the transmitter is accidentally
programmed or switched off during operation. The lock
mode icon ቨ on the display indicates that the lock mode is
activated.
To deactivate the lock mode, first press the SET button and
then press the ̆/̄ rocker button to select “LOC.OFF”. If
you confirm your selection by pressing the SET button, the
buttons can be operated as usual.
Exiting the operating menu –
EXIT
Via the “EXIT” menu, you can exit the operating menu and
return to the standard display.
ቨ
ew500_SK.book Seite 55 Dienstag, 4. November 2003 4:02 16