Filter
Top Products
25
If a problem occurs ...
You cannot hear anything
Possible cause Solution
Is there a free line
of sight between
receiver and trans-
mitter?
Remove obstacles in the light path
between receiver and transmitter.
Are transmitter and
receiver exposed to
direct sunlight?
Avoid exposure to direct sunlight.
Is the receiver still
within the trans-
mitter’s range?
Move the receiver closer to the
transmitter. If necessary, switch
the
receiver on again.
Are all connectors
connected correctly?
Check the connection between the
transmitter and your sound source
(see page 7).
Is the operation
indicator B lit?
Check if the transmitter is switched
on (see page 14).
Is the transmitter
set up the wrong
way round?
Set up the transmitter so that the
cables are guided away from the
receiver (see page 6).
Does the receiver’s
Sennheiser logo face
the transmitter?
Wear the receiver the right way
round, with the Sennheiser logo
facing the transmitter.
Is the volume of
the sound source
sufficient?
Set the volume on your sound
source to a medium level.
Is the volume of the
receiver sufficient?
Increase the volume by turning the
volume control 2 of the receiver
(see page 16).
Is the rechargeable
battery inserted
properly into the
receiver and fully
charged?
Check if the channel indicator 1
is lit. If it is not lit: recharge the
rechargeable battery (see
page 19).
Remove the rechargeable battery
and reinsert it into the receiver.
If this doesn’t help: recharge
the rechargeable battery
(see page 19).