Filter
Top Products
10
Putting the Set 830 S-MKE into operation
̈ Press the microphone onto the Velcro tape.
̈ Connect the jack plug of the microphone to the blue
socket <BedienelementRoundNW>E of the transmitter.
Note:
You can change the sound by varying the position of the
microphone in front of the loudspeaker.
Connecting the transmitter to the mains
– If there is no audio signal from the sound source
for about 3 minutes, the transmitter automatically
switches off. The operation indicator goes off.
̈ Select the suitable country
adapter N for your wall
socket.
̈ Slide the supplied country
adapter onto the mains
unit M.
̈ Connect the yellow connector
of the mains unit to the yellow
socket H of the transmitter.
̈ Plug the mains unit M into a
wall socket.
The operation indicator B
on the transmitter lights up
green.
Notes:
– When connecting the transmitter to the mains
for the first time, charge the rechargeable
battery for 3 hours as described in the chapter
“Storing and charging the receiver” on
page 19.
EU
UK
US
N
M
H
M
3h