Filter
Top Products
15
Using the Set 830 S-MKE system
Switching the receiver on/off
To switch the receiver off:
̈ Press the on/off button 3 until the channel indicator 1
goes off.
Hearing damage due to high volumes!
This receiver allows you to set higher
volumes than conventional headphones.
This can cause hearing damage in persons
with healthy hearing and especially in chil-
dren.
̈ Before using the receiver, set the volume
on the receiver to a low level.
̈ Do not continuously expose yourself to
high volumes.
To switch the receiver on:
̈ Press the on/off button 3 until the
channel indicator 1 lights up.
The channel indicator 1 goes off after
30 seconds.
Notes:
– For how to store and charge the receiver,
see page 19.
– If you are not within the range of the trans-
mitter, the receiver automatically switches off
after 3 minutes.
CAUTION!
1
3
3h