Filter
Top Products
27
Using the RS 180
Associating other Kleer compatible headphones to the transmitter
The following describes how to associate the Sennheiser MX W1
earphones to the TR 180 transmitter.
For information on how to associate other Kleer compatible headphones to
the transmitter, refer to the instruction manual of the corresponding
product.
̈ Press the operation/pairing button on both MX W1 earphones for
7seconds.
̈ Press the multi-function button ቤ of the transmitter for 7 seconds.
After approx. 30 seconds, the MX W1 earphones are paired with the
transmitter and you can hear your sound source via the earphones. The
multi-function button ቤ of the transmitter flashes green.
Associating several headphones to the transmitter
In order to be able to use several headphones simultaneously, you first
have to associate your additional headphones to the transmitter.
̈ Follow the steps in the previous chapter “Associating the headphones
to the transmitter”.
You can then only use the last headphones paired to listen to your
sound source (single-user operation).
To listen to your sound source with up to 4 headphones simultaneously:
̈ Set your transmitter to multi-user operation as described in the next
chapter.
7s
3
5s