Filter
Top Products
23
Using the RS 160
Associating the headphones to the transmitter
The headphones and the transmitter are already associated upon delivery.
You only have to associate the headphones to the transmitter
• if you want to use another pair of Kleer compatible headphones or
• if the transmission between the headphones and the transmitter is
disturbed by interferences in the vicinity.
If you want to use several headphones, refer to the chapter “Associating
several headphones to the transmitter” on page 25.
Associating the HDR 160 headphones to the transmitter
When associating the headphones to the transmitter, the distance
between the transmitter and the headphones should not exceed 1 m.
̈ Make sure that the transmitter and the headphones are in standby
mode (see page 19 and 20).
The RS 160 system features the digital wireless audio transmission
technology from Kleer. You can also associate other Kleer
compatible headphones (e.g. the Sennheiser MX W1) to the
transmitter. For more information, refer to the chapter “Associating
other Kleer compatible headphones to the transmitter” on page 25
or to the instruction manual of the corresponding product.