Filter
Top Products
Using the RS 160
22
Adjusting the signal of the sound source
The transmitter automatically ensures that the headphones always
receive an optimum signal. If necessary, use the VOLUME control ቦ to
adjust the volume of the audio signal.
However, the signal of the sound source can be so strong that it can no
longer be automatically adjusted.
If the signal of the sound source is too strong, the multi-function LED ባ of
the transmitter flashes or lights up red.
̈ Either adjust the VOLUME control ቦ on the transmitter so that the
multi-function LED ባ stops flashing or lighting up red.
̈ Or adjust the volume of your sound source so that the multi-function
LED ባ stops flashing or lighting up red.
5
2