Filter
Top Products
Putting the RS 160 into operation
14
Inserting rechargeable batteries/standard batteries into the transmitter
and changing them
̈ Power the TR 160 transmitter either with rechargeable batteries (AA
size, NiMH, 1.2 Vat least 1,300 mAh) or standard batteries (AA size,
1.5 V).
̈ Open the battery compartment at the base of the transmitter as
shown.
̈ Remove the depleted rechargeable batteries or batteries (where
applies).
̈ Insert the rechargeable batteries or batteries. Observe correct polarity.
̈ Close the battery compartment.
The cover locks into place with an audible click and the transmitter
switches on. The multi-function LED ባ flashes green after 9 seconds.
The transmitter is in enrollment mode.
1s