Filter
Top Products
Using the devices
22
Either:
̈ Store the frequency bank and channel
setting by pressing the jog dial on your
transmitters.
The RF signal is activated. You can carry
out the Sync function (see right-hand
column) at a later time to establish a
transmission link between transmitters
and receivers.
–
Or:
̈ Immediately synchronize your receivers
with your transmitters by carrying
out the Sync function (see right-hand
column). The icon in the left lower
corner of the transmitter display indicates
that the Sync function can be carried out.
The transmission link between transmit-
ters and receivers is established.
–
– To cancel the transfer:
̈ Press the STANDBY button on the
transmitter.
“ ” appears on the display panel of the
transmitter. “ ” also appears if no suit-
able receiver was found.
Easy Setup Sync Sync