Sanyo dc-ht210w Home Theater System User Manual


 
5.2 PBC (Play Back Control)
ON: Activate the PBC function. When playing a disc encoded with PBC function such as
VCD 2.0,etc, press [MENU] to return to the PBC menu.
OFF: Disable the PBC function.
NOTE: This function only works with those discs encoded with PBC function.
DVD, VCD1.1, CD-DA and MP3 disc have no PBC menu.
5.3 AUDIO, SUBTITLE and DISC MENU
Select a preferred audio language, subtitle language and disc menu language in these
items.
You can also make selection of the audio language by pressing [AUDIO], and the subtitle
language with [SUBTITLE] on the remote control.
NOTE: If the selected language is not available for the currently playing disc, the disc's
default setting will remain enabled.
5.4 PARENTAL
This item allows the user to set a maximum rating of the movies that can be viewed.
Movies rated higher than the level set for the parental lock can not be viewed. What's
more, to key in the correct password is needed to reset the level. The default password
is 136900.
NOTE: This function only works with those discs that have parental rating encoded into
them.
5.5 PASSWORD
5.6 DEFAULT
Enter to restore all the default settings except the settings in PARENTAL and
PASSWORD item.
5.5.1 PASSWORD MODE
You can switch on/off the password function in this item.
NOTE: You must key in the correct password and press [ENTER] to confirm before you
change the option in this item. The default password is 136900.
5.5.2 PASSWORD
You can reset the password in this item.
NOTE: The default password (136900) is always active even if the password has been
reset.
-17-
System Setup