Filter
Top Products
1.5 SCREEN SAVER
ON: If the image remains motionless on the screen, for example the disc is paused,
stopped etc, for several minutes, a screen saver will appear on the screen. You can
press any key or button except [STANDBY/ON] to wake it up.
OFF: Disable the screen saver function.
1.6 HDCD(High Definition Compatible Digital)
HDCD (High Definition Compatible digital) is a patented encode/decode process for
delivering the full richness and details of the sound from HDCD-encoded CDs.
You can set the digital filter to 2x, 1x or off.
1.7 LAST MEMORY
ON: During playback or in the paused status each time you open the disc tray or turn off
the player, the unit will memorize the last playback time. Next time when you insert the
same disc and close the disc tray to load the disc, the unit will play from the memorized
point.
OFF: Disable the last memory function.
2 AUDIO SETUP PAGE
2.1 ANALOG AUDIO SETUP
2.1.1 DOWNMIX
LT/RT: The 5.1-channel audio is mixed into left channel and right channel and is output
via the FL and FR speakers respectively.
STEREO: The 5.1-channel audio is mixed into stereo signal and is output via the FL and
FR speakers.
3D SURROUND: This mode creates a virtual surround effect from stereo or multi-
channel audio contents.
5.1CH: Turn off the DOWNMIX mode. If this unit is connected to a 5.1-channel amplifier,
this item should be selected.
NOTE: This function only applies to the Dolby AC -3 encoded 5.1-channel discs.
2.1.2 FRONT, CENTER, REAR SPEAKER and SUBWOOFER
Only when the DOWNMIX mode is turned off (DOWNMIX is set to 5.1CH), are the
CENTER SPEAKER and REAR SPEAKER activated. The FRONT SPEAKER can be set
to LARGE or SMALL. The CENTER SPEAKER, REAR SPEAKER can be set to LARGE,
SMALL or OFF and the SUBWOOFER can be set to ON or OFF.
NOTE:
If the speaker is set to LARGE, the output level will be higher than that of SMALL.
If the speaker is set to SMALL, the output level will be lower than that of LARGE.
If a speaker is set to OFF, no audio is output from it.
2.1.3 DIALOG
When DOWNMIX is set to LT/RT or STEREO, this item is available.
Adjust the value of this item to control the dialog volume.
NOTE: When playing 5.1CH disc, this item can be used to adjust the volume of the
speakers.
-12-
System Setup