Samsung HT-TZ312 Stereo System User Manual


 
playback
46 47
ENG
PLAYBACK
USING THE PLAYBACK FUNCTION
Using the Title Menu
d
For DVDs containing multiple titles, you can view the title of
each movie. Depending on the disc, the availability of this
feature may vary.
In Stop mode, press the 1. MENU button.
Press the Cursor 2. S,T button to move to Title Menu.
Press the 3. ENTER button.
The title menu appears.
d Press the EXIT button to exit the setup screen.
M
The Title menu display may be different depending on the disc.
ENTERMOVE
EXIT
USING BLUETOOTH
You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires!
What is Bluetooth?
Bluetooth is a new technology that enables Bluetooth-compliant devices to easily interconnect
with each other using a short wireless connection.
A Bluetooth device may cause a noise or malfunction, depending on usage.
When a part of the body is in contact with the receiving/transmitting system of the Bluetooth device
or the Home Cinema System.
Electrical variation from electrical jamming by the wall, corner or offi ce partitioning.
Electrical interference from the same frequency-band devices including medical equipment,
microwave oven and wireless LAN.
Pair the Home Cinema System with the Bluetooth device while maintaining a close distance.
The further the distance is between Home Cinema System and Bluetooth device, the worse the
quality. If the distance exceeds the Bluetooth operational range, the connection is lost.
In poor reception-sensitivity areas, the Bluetooth connection may not work properly.
The Home Cinema System has an effective reception range of up to 10 m in all directions if there are
no obstacles. The connection will be automatically cut off if the distance is out of this range. Even
within this range, the sound quality may be deteriorated by obstacles such as walls or doors.
To connect the Home Cinema System to a bluetooth device
Check if the Bluetooth device supports the Bluetooth-compliant stereo headset function.
Press the 1. FUNCTION button on the front panel of the
home cinema system repeatedly until the "BT AUDIO"
appears.
The mode switches as follows :
DVD/CDD.IN AUX 1 AUX 2 USB
(BT AUDIO) FM.
You will see “ WAIT” for 2 seconds and then “READY
on the front display of the Home Theater System.
Select the Bluetooth menu on the Bluetooth device you 2.
want to connect. (refer to Bluetooth device's user manual)
Select a Stereo headset menu on the Bluetooth device.3.
You will see a list of scanned devices.
Select "4. Samsung Home Theater" from the searched list.
When the Home Cinema System is connected to the
Bluetooth device, the Home Cinema System will display
"Connect" on the front display, followed by the name of the
connected Bluetooth device.
The Home Cinema System connection is complete.
Play music on the connected device.5.
You can listen to the music playing on the connected Bluetooth device over the home cinema system.
M
You may be required to enter a PIN code(password) when connecting the Bluetooth
device to the home cinema system. If the PIN code input window appears, enter <0000>.
The Home Cinema System may control play related function only when connected device
supports the function.
If connected device dose not support some play related function, the Home Cinema
System can't control the device.
TThe Home Cinema System only supports Middle Quality SBC data(up to
237kbps@48kHz), and does not support High Quality SBC data(328kbps@44.1kHz).
HT-Z210/TZ212/TZ215 doesn't support Bluetooth function.
Connect
Bluetooth
Device