Filter
Top Products
- English
Settings
Upgrading Software
The menu allows you to
upgrade the product’s software for performance
improvements or additional services.
Never turn the product off or back on manually
during the update process.
The update is complete when the product turns
off after restarting. Press the button to
turn on the updated product for your use.
Samsung Electronics takes no legal
responsibility for product malfunction
caused by an unstable Internet connection
or consumer negligence during a software
upgrade.
In the Home menu, select , and then
press the
v
button.
Select , and then press the
v
button.
Select , and then press the
v
button.
Select one of the following methods:
Press the
v
button.
Directions for each method begin below.
✎
If you want to cancel the upgrade while the
upgrade software is downloading, press the
v
button.
Your product must be connected to the Internet to
use the function. Remove all discs before
you begin.
Select , and then press the
v
button.
The Connecting to Server message appears.
If an update is available, a popup message
appears asking if you want to upgrade. If you
select , the product turns off automatically,
turns on, and then begins the upgrade.
The update progress popup appears. When
the update is completed, the product turns off
automatically again.
Press the button to turn on the
product.
Visit www.samsung.com.
Click on the top right of the page.
Enter the product's model number into the
search field. As you enter the model number, a
drop down will display products that match the
model number.
Left click your product's model number in the
drop down list.
On the page that appears, scroll down to and
then click .
Click in the center of the page.
Click the icon in the File column on the right
side of the page.
Click in the first pop-up that appears.
Click in the second pop-up to download
and save the firmware file to your PC.
Unzip the zip archive to your computer. You
should have a single folder with the same name
as the zip file.
Copy the folder to a USB flash drive.
Make sure no disc is inserted in the product,
and then insert the USB flash drive into the USB
port of the product.
In the product’s menu, go to
.
Select .
The home theater searches for the software on
the USB drive. When it finds the software, the
Update Request pop-up appears.
Select . The home theater turns off, turns
on, and then begins the upgrade. When the
upgrade is done, the home theater turns off.
Press the button to turn on the home
theater.
✎
There should be no disc in the product when
you upgrade the software using the USB Host
jack.
✎
When the software upgrade is done, check
the software details in the
menu.