Filter
Top Products
- English
Before you begin, confirm that the product is
connected to your router with a network cable.
Ğ
To start the configuration process, follow these steps:
In the Home menu, select , and then
press the
v
button.
Select , and then press the
v
button.
Select , and then press
the
v
button.
The screen appears.
Press the
+
button on the
menu.
Use
$%
button to select , and then press
the
v
button.
Settings
Display
Audio
Network
System
Language
Security
General
Support
0 0 0 0
0
0 0 0 0
0 0 0 0
0 0 0
Wired Network Settings
Internet Protocol Setup : Auto
IP Address :
Subnet Mask :
Gateway :
DNS : Auto
DNS Server :
> Move " Select ' Return
The Network function acquires and fills in
the values for , , etc.,
automatically.
After the Network function has acquired the
network values, press the button.
Select , and then press
v
. The
home theater validates the network connection.
When it is done, press the button.
Ğ
If you have a static IP address or the Automatic
procedure does not work, you’ll need to set the
Network Settings values manually. You can get the
Network Settings from your Internet Service Provider
(ISP).
Settings
Display
Audio
Network
System
Language
Security
General
Support
0 0 0 0
255 255 255
0
0 0 0 0
0 0 0 0
Wired Network Settings
Internet Protocol Setup : Manual
IP Address :
Subnet Mask :
Gateway :
DNS : Manual
DNS Server :
> Move " Select ' Return
Follow the first four steps in the Automatic
procedure, but select instead of Auto in
Step 4.
Press the ▼ button to go to the first entry field
(IP Address).
Use the number buttons on your remote to
enter numbers.
When done with each field, use the ▶ button
to move successively to the next field.
You can also use the other arrow buttons to
move up, down, and back.
Enter the , , and
values.
Press the ▼ button to go to .
Press the ▼ button to go to the first DNS entry
field. Enter the numbers as above.
Press the button on your remote.
Select , and then press
v
. When
the test is completed, press the button
to exit to the previous screen.
Select , and then press
v
.
The screen appears.
The product verifies the network connection
and then connects to the network. When it is
done, highlight , and then press
v
.