Filter
Top Products
English 25
02 Connections
METHOD 1 : Component Video (BETTER QUALITY)
If your television is equipped with Component Video inputs, connect a Component video cable (not
supplied) from the Component Video Output (Pr, Pb and Y) Jacks on the back of the product to the
Component Video Input Jacks on your TV.
NOTE
You can select from a variety of resolution settings such as 1080i, 720p, 480p and 480i, depending on the
disc type. (See page 33)
The actual resolution may differ from the setting in the Setup menu if both Component and HDMI cables are
connected. The resolution may also be different depending on the disc. (See page 33)
After making the video connection, set the Video input source on your TV to match the corresponding Video
output (HDMI, Component or Composite) on your product.
See your TV owner's manual for more information on how to select the TV's Video Input source.
If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote
control and select COMPONENT as the external source of the TV.
In DVD playback, if both HDMI and Component jacks are connected and you select the Component 1080p,
1080i, 720p or 480p mode, the Display Setup menu will show the output resolution as 1080p, 1080i, 720p
or 480p in the menu. The resolution is actually 480i.
METHOD 2 : Composite Video
(GOOD QUALITY)
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO
IN jack on your TV.
NOTE
The VIDEO source always outputs in 480i resolution regardless of the resolution set in the Setup menu.
(See page 33)
After making the video connection, set the Video input source on your TV to match the corresponding
Video output (HDMI, Component or Composite) on your product.
See your TV owner's manual for more information on how to select the TV's Video Input source.
If you have set the product's remote control to operate your TV, press the
TV SOURCE
button on
the remote control and select VIDEO as the external source of the TV.
CAUTION
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by
copyright protection systems and the picture will be distorted on the television.
✎
✎
!
FRONT FRONT TOP
SPEAKERS OUT
VIDEO OUTAUX IN
SUBWOOFER
CENTER FRONT
FRONT TOP
COMPONENT OUT
SPEAKER IMPEDANCE : 3
S
PEAKER
S
OU
T
A
UX IN
S
PEAKER IMPEDAN
C
E : 3
Red
Yellow
METHOD 2
Blue Green
METHOD 1
HT-D6730W_XAA_0208.indd 25HT-D6730W_XAA_0208.indd 25 2011-02-09 ¿ÀÀü 3:15:592011-02-09 ¿ÀÀü 3:15:59