Filter
Top Products
English - 41
System Setup
4
Press the
……††
buttons to select the desired audio
option from the options described below, then press
the ENTER or √ button.
5
Press the
……††
buttons to select the desired item,
then press the ENTER button.
■
Press the RETURN or œ button to return
to the previous menu.
Press the MENU button to exit the menu.
NOTE
Digital Output
• PCM : Select this when your equipment does not
decode Dolby Digital.
• Bitstream : Outputs Dolby Digital or MPEG-2 or DTS
audio as bitstream. Select this when your
AV receiver or AV amplifier has a Dolby
Digital or MPEG-2 or DTS Decoder.
PCM Down Sampling
• On : Select this when the Amplifier connected to the
player is not 96KHz compatible.
In this case, the 96KHz signals will be down
converted to 48KHz
• Off : Select this when the Amplifier connected to the
player is 96KHz compatible. In this case, all
signals will be output without any changes.
■
LPCM sound track is always outputted as PCM.
■ Be sure to select the correct Digital Output or
you will hear no sound or a loud noise.
■
When playing a Dolby Digital movie make sure
the Digital Output is set to Bitstream.
■ If you have the unit connected via the 5.1
channel analog outputs and play a DVD Dolby
Digital disc, sound will only be heard from the
Front Left and Right speakers.
■ If you have the unit connected via any analog
output and play a DTS DVD disc, no sound
will be heard. To hear sound, the digital output
must be connected and set to Bitstream.
NOTE
■ Even when PCM Down Sampling is set to Off,
some discs will only output downsampled
audio though the digital outputs.
NOTE
HDMI
• If your TV is not compatible with compressed
multi-channel formats (Dolby Digital, DTS, MPEG), you
should set Digital Audio to PCM.
• If your TV is not compatible with LPCM sampling rates
over 48kHz, you should set PCM Down Sampling to On.
Setting up the Speaker
Options
1
With the unit in Stop mode, press the MENU
button.
2
Press the
……††
buttons to select Setup, then press
the ENTER or √ button.
3
Press the
……††
buttons to select Audio Setup, then
press the ENTER or √ button.
4
Press the
……††
buttons to select Speaker Setup,
then press the ENTER or √ button.
BD
BD Player Setup
Memory Card
Title
Music
Photo
Setup
√√
Language Setup
√√
Audio Setup
√√
Display Setup
√√
Parental Setup
√√
BD
BD Player Audio Setup
Memory Card
Title
Music
Photo
Setup
√√
Digital Output : PCM
√√
PCM Down Sampling : On
√√
Dynamic Compression
: On
√√
Speaker Setup
√√
BD
BD Player Speaker Setup
Test Tone
L
Small
LS
Small
R
Small
Small
C
LFE
RS
Small
Dynamic Compression
This is only active when a Dolby Digital signal is detected.
•
Off : You can enjoy the movie with the standard
Dynamic Range.
•
On : When Movie soundtracks are played at
low volume or from smaller speakers, the
system can apply appropriate
compression to make low-level content
more intelligible and prevent dramatic
passages from getting too loud.
MOVE SELECT RETURN EXIT
MOVE SELECT RETURN EXIT
MOVE SELECT RETURN EXIT
A
A
A