Filter
Top Products
English 29
02 Connections
Connecting to the Network
Wireless Network
You can connect to the network with a Wireless IP sharer.
Connect the included wireless LAN adapter to the Wireless LAN jack on the back panel of the
product.
- This unit is compatible with the supplied Wireless LAN Adapter.
- You can also use the wireless network by connecting the Wireless LAN Gender Adapter to the
Wireless LAN Adapter, and then attaching the Wireless LAN Adapter to the Gender Adapter.
Set the network options. (See page 41)
NOTE
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable
operation of the wireless network.)
Wireless LAN, by its nature, may cause interference, depending on the use condition (AP performance,
distance, obstacles, interference by other radio devices, etc).
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
When applying the security key for the AP (wireless IP sharer), only the following is supported.
Authentication Mode : WEP, WPAPSK, WPA2PSK
Encryption Type : WEP, AES
For the AllShare function, a PC must be connected in the network as shown in the fi gure.
1.
2.
✎
1)
2)
HDMI OUT
HDMI OUT
COMPONENT OUT
VIDEO OUT
LAN
AUX IN
WIRELESS
LAN
HDMI OUT
CO
MP
O
NENT
OUT
V
IDEO OU
T
LAN
AUX I
N
W
IRELE
SS
L
A
N
Wireless IP sharer
Networking with PC for
AllShare function
(See pages 63~64)
PC
Broadband
service
Wireless LAN Adapter
OR
HT-C6600_XAA_0504.indd 29HT-C6600_XAA_0504.indd 29 2010-05-04 2:14:542010-05-04 2:14:54