Filter
Top Products
ENGLISH
19
The C Class CRK2, Dual Rack Adaptor is available as an accessory from your authorized Samson dealer.
1. Disconnect any cables that may be connected from the C•Class unit to be mounted, i.e., the power supply cable, audio
cables, or headphones.
2. Align the holes in the C•Rack with the holes on the bottom of of the C•Class unit to be mounted. Use the supplied phillips
head M4 machine screws to fix the unit to the rack as shown below.
3. Repeat steps 1 and 2 to mount the second C•Class unit if desired.
4. Once the units are mounted on the C• Rack, the assembly can be placed into a rack and secured via the rack ears. (Screws
not supplied)
5. To remove the C•Class unit from the C•Rack, reverse the instructions above.
CRK2 - Dual Rack Adaptor (optional)
If you experience any difficulties, or require further assistance, contact Samson Customer Service at 1-800-3SAMSON (1-800-372-
6766) M–F 9AM to 5PM (eastern standard time). For more product information please visit our website at www.samsontech.
com.