Filter
Top Products
27
110 PUNCHDOWN CONNECTOR - Termination for CAT-5 connection between the
UNO-S1 Keypad and the CAM6.6 controller.
1
INSTALLER
COMPONENT GUIDE
UNO-S1 Keypad-CAT-5 Connection
1
N
EWMARKET
, NH U.S.A.
DESIGNED IN USA MADE IN KOREA
BR
GR
OR
+12V
BR/W+12V
GND
GR/W
GND
OR/W
COM A
BL/WCOM B
BL
IR OUT
UNO-S1
System Control Keypad
STATUS IN
CAT-5 Connection
The UNO-S1 Keypad uses a 110-punchdown
terminal to provide a simple installation and
strong connection for CAT-5 cable’s eight con-
ductors. Punchdown terminals require the use of
a punchdown tool which has been provided with
the keypad kit. Attach the CAT-5 cable to the
110-punchdown terminal on the UNO-S1 Keypad
as shown, matching the conductor colors to the
connection color guide. The keypad will not
operate properly if the terminations deviate from
the required connection order.
Caution:
Take care when using an impact 110 punchdown
tool, as this may overspread the contact points.
Use of the impact tool may propel stray bits of wire
and jacket into the keypad’s chassis and possibly
cause a short in the circuitry. Gently shake or blow
air through the keypad chassis to remove stray wire
before the keypad is installed into the junction box.