Filter
Top Products
Maintenance and Troubleshooting
82 Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual
PRE
L
IMINAR
Y
5. Install the new lamp:
a Take care to align the new lamp properly in the correct orientation inside the lamp
compartment.
b Press firmly on the lamp to properly seat it.
c Secure the lamp by tightening the three (3) captive screws.
6. Close the lamp compartment cover and tighten the captive screw.
7. Re-attach the Left (Exhaust) Side Panel to the projector.
The lamp will automatically turn on again when the cover is closed.
Note