Filter
Top Products
Operation
62 Runco LS-10d Installation/Operation Manual
PRE
L
IMINAR
Y
Figure 4-8. Effect of PCE Hue and Saturation Controls
• White Balance: To precisely adjust the white point associated with the custom
color gamut, choose White Balance from the PCE sub-menu. These controls
operate identically to the Gain controls in the Display Color menu (described on
page 58).
Input Image: The Input Image controls are functionally similar to those in the Picture
menu (refer to page 50), but are accessible only by entering the Calibration menu
passcode.
The Input Image settings establish the “zero point” for the Picture
menu settings, whose values represent offsets from the Input
Image settings. For example, if you set Brightness to 10 in this
menu, setting Brightness to 10 in the Picture menu results in an
actual setting value of 20 (10+10).
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
Hue
Hue
Hue
Hue
Hue
Hue
Saturation
Saturation
Saturation
Note