Filter
Top Products
Installation
32 Runco LS-10d Installation/Operation Manual
PRE
L
IMINAR
Y
Connecting Source
Components to the DHD
Controller
Connect your video sources to the DHD Controller as shown and described in the
sections that follow.
HDMI Source Connections: See Figure 3-8.
Figure 3-8. HDMI Source Connections
➤
Use the HDMI inputs whenever possible. This ensures the highest
video quality because the signal is carried in the digital domain
throughout the entire signal path, from source component output
into the projector.
You can also connect computers with DVI output to these inputs.
Refer to Supported Timings on page 91 for a list of compatible
input signals.
Tip
Note
USB
To Accessory Box
Video 2
Video 3
PC / Control
RS-232
IR
Display Control
HDMI 1
HDMI 3
HDMI 2
HDMI 4
Ethernet
HDMI Out
To Display
HDMI Out
Audio Only
R
IGGERS
RS-232
23
HDMI
AV OUT
HDMI
AV OUT
HDMI
AV OUT
HDMI sources (BD, DVD, DTV Set-Top Box etc.)
HDMI
AV OUT