Filter
Top Products
17
To record a class performance, use the Student [1–8] buttons to select the student(s) to be recorded—use the [Bank]
button to access the Student [1-8] buttons for additional students. During rehearsal, adjust the input level on the
external recording device. When rehearsal is complete, press the Record button on the external recording device and
have the student(s) perform. When the performance is completed, press the Stop button on the external recording
device.
To play back a class performance, press the [Aux. Input] button, cue the performance on the external recording/play-
back device, press the Play button on the external recording/playback device, and adjust the playback level using the
GLC-1’s [CD/Aux] slider.
Use an External Monitoring (Speaker) System
Make sure the external monitoring (speaker) system is connected properly. The [Mon. Out] connectors on the
GLC-1 Hub should be connected to the inputs on the external monitoring system. Set the volume on the external
monitoring system to a moderate level.
While the conferencing system is in use, use the GLC-1’s [Monitor] slider to adjust the overall level being sent to the
external monitoring system. Move the slider upward to increase the overall level and move the slider downward to
decrease the overall level. Place the slider approximately halfway between the minimum and maximum positions for
optimum performance.
Readjust the level control of the external monitoring system itself as needed.
Chapter 2: Operating the GLC-1