Filter
Top Products
4-Channel Stereo/Single Bridged Operation
• RCAs are connected to front or front and rear inputs
• Signal Input Switch is set to 2-channel or 4-channel input
• Gain for front and rear operates independently
• Impedance for front and rear stereo channel should be no less than 2Ω
• Impedance for rear bridged channel should be no less than 4Ω
• Front XCard is set for High-Pass, Low-Pass or Full Range
• Rear XCard is set to Full Range
– +
2 ohm
– +
2 ohm
+ L–
2-Ch.
{
+ –
Rear XCard
Front XCard
2 ohm
*Note: XCard can be inserted in HP, LP, or Full Range
Rear XCard*
Front XCard*
FULL
HP
2-Channel Input
Rear XCard
Front XCard
*Note: XCard can be inserted in HP, LP, or Full Range
Rear XCard*
Front XCard*
FULL
HP
4-Channel Input
– L+ – R++ R–
+ –
4-Ch.
INPUT
{
2 ohm
4 ohm
– 20 –