Filter
Top Products
Mono Operation
+ L– + R–
Input
2-Ch.
{
+ –
+ –
Rear XCard
Front XCard
4 ohm 4 ohm
*Note: XCard can be inserted in HP, LP, or Full Range
Rear XCard*
Front XCard*
LP
LP
2-Channel Input
– L+ – R+
– 17 –
• RCAs are connected to front inputs
• Signal Input Switch set to 2-channel input
• Gain for front and rear operates independently
• Impedance for front bridged channel should be no less than 4Ω
• Impedance for rear bridged channel should be no less than 4Ω
• Front XCard can be set for High-Pass, Low-Pass or Full Range
• Rear XCard can be set for High-Pass, Low-Pass or Full Range